The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        

Tamping machine PLASSER & THEURER 08-32(M84), 1991 for Sale

Details


 
(0 reviews)  

SKU
SKU20264
Weight
40000.00 kg
Click here to be notified of price drops of this item

 

Sales information

  • Location -  Mozambique
  • Price EXW -  : 360.000 Euro, without VAT
  • TAMPERS.EU commission: 10% for «FREE» Add: 36.0000 Euro included in the price EXW.  
  • Broad Gauge Track 1067 mm 

=====================================================================================================

Тechnical condition  Latest inspection (revision): 27.03.2015 (valid revision to: 27.03.2018) 
Computer controlled: Works, Automatic ALC Plasser
Tamping units: Works, Good mechanical condition
Axles and transmission: Works, Good mechanical condition
Engine: Works, Good mechanical condition

=====================================================================================================

 

Product information /Please corrected if necessary/

Producer

Brand
The continuous action tamping machine (Non-stop tamping).
The way to success.
The success of the 08 series is based on the notion of separating the main frame from the work unit frame. This means that the main frame can move forward continuously during work, when the essentially cyclic action of the working unit for lifting, lining and tamping is limited to the sub-frame.
This brings:
Higher working speed
The working speed of a machine from the 08 series lies up to 50% above that of the conventional tamping machine. Even short train intervals can be used effectively and cost-efficiently.
Reduction of running costs
Due to the substantially lower acceleration of mass, the wear on breaks as well as on hydraulic and pneumatic components is reduced.
Highest working comfort
Due to the separation of main frame and sub-frame, the vibrations of the work units are not transmitted to the cabins. Working comfort is considerably improved, as the operator is no longer subjected to the acceleration pull and the braking jolts.
Easy combination with other operations
The continuous working action permits ideal combination with other continuous action machines such as a ballast plough and a dynamic track stabilizer, to form a high capacity mechanized maintenance train (HMDZ).

Main Frame

Made of rolled profiles and steel sheets, produced using the most up-to-date welding methods: the design guarantees stability and precision even on heavy types of permanent way. Two 2-axled bogies ensure smooth vehicle running.
Sub-frame
It carries all work units and measuring systems that use the cyclic work sequence: the lifting and lining units, the two tamping units and the sleeper-end consolidators. At the front it is supported on the main frame via a longitudinal roller guide. The sub-frame axle, powered by hydraulics during working travel, hydraulic cylinders and a pneumatic brake ensure the cyclic work sequence.
Tamping units
The two high-pressure tamping units work according to the well-proven non-synchronous uniform pressure tamping principle. Force equilibrium between the tine pairs, directional vibration in the squeeze direction and the ideal vibration frequency of 35 Hz guarantee completely uniform tamping. For work in curves the unit can be centered automatically over each rail.
08-32 : two tamping units with 32 tamping tines in all for tamping two sleepers per tamping cycle.
Sleeper - end consolidators
On request, hydraulically powered sleeper-end consolidators can be mounted level with the tamping units. During tamping these fill empty gap occurring at the front side of the sleeper during the lining process. This permits optimum fixation of the track in lifted and lined position.
Lifting and lining units
The two well-proven roller lifting and lining units lift and line the track in one operation. The units have a total of four roller-lifting clamps. The distribution of the lifting forces and the exact centering of the units over the rails prevent the occurrence of tilting moments and excessive wear on rail fastenings. At the start of work they are lowered on to the track and remain there during entire work process. Lifting and lining is carried out only when the unit is at standstill. This permits precise lifting and lining. During forward motion the corresponding hydraulic cylinders are switched to pressure less mode.
Driver’s cabin
The cabin at the front of the machine houses the operating controls for the lining and leveling system and is equipped with all necessary controls for transfer travel.
Drive and work cabin
In the second cabin all operating and monitoring controls for operations and for transfer travel are clearly laid out. Large safety glass windows offer an excellent view onto the working area. Extensive soundproofing and vibration dampening achieve the high level of working comfort. Access to the cabins is via side steps and safety platforms. Between the two cabins there is an end-to-end roof and a connecting corridor for servicing.
ALC
The system calculates the correction values for maintenance of track radii and passes the results continuously to the measuring systems during work. The required target data is keyed in before start to work. Using this system it is possible to treat the entire track geometry. The ALC automatic guiding computer works on the basis of an industrial computer with a monitor and a keyboard. This concept permits the almost unlimited storage of track geometry data. Once entered, the data will be available at any time. Moreover, when the target geometry is unknown, the actual track position can be determined with the aid of measuring run by the tamping machine and the target geometry can be obtained via subsequent optimization calculation taking into account existing restrictions and fixed points. Electronic versine compensation is also available.
Processor control

All work sequences and hydraulic processes are controlled and monitored by a microprocessor. The entire electronic system is built in modular design. The program control contains a measuring and monitoring system that enables fast checking of all control functions.

A variety of auxiliary units help speed up the work process considerably. For example, the fully automatic control of the tamping process and the forward motion of the machine are available. The work speed can be selected freely in a certain range.

The advantages
- Highest tamping due to non-synchronous uniform pressure tamping principle
- Optimum tamping frequency of 35 Hz
- Directional, linear vibration
- 50% higher work capacity
- Unrivalled working comfort
- Reduced wear
The savings
- Lower maintenance costs due to high tamping output
- Lower operational hindrance costs due to optimum utilization of short intervals between trains
- Reduction of running costs due to less consumption of spare parts

  
  Drawing
 
   
Model
 08-32 
Year model production
/1991
Chassisnumber
/08-32 M84

Vehicle information

Registration number
/Please enter/
Weight (kg)
 39900 /Please corrected if necessary/
Latest inspection (revision)
 ........... (valid revision to ................) /please corrected if necessary/
REM inspection ( are granted upon request, contact our regional office or agent): Yes/No
REM expertise in selling price ( are granted upon request, contact our regional office or agent): Yes/No
 /Please enter if you want inspection and expertise in selling price/
Transmission
Unknown /Please corrected if necessary/

Engine/Fuel

Engine volume
/Please enter if you have this information/
Engine output
/Please enter if you have this information/
Fuel type
Diesel
Number of fuel tanks
01

Load details

Load dimensions (l/w/h)
 L = 19880 (17880 body) / W = 2750 / H = 3640 mm
Payload (kg)
N/A

Truck details

Cabin
Unknown
Axle type
Unknown
Hydraulics
N/A
Pull-hook
N/A
Accessories
N/A
Euro class
N/A

Suspension

Front shaft
N/A
Drive shaft
N/A
Bogie
N/A

Tractor

Disc
N/A
Locking
N/A

Other information

        EN: Tamping machine
RU: Выправочно-подбивочно-рихтовочная машина
BG: Подбивна машина           
Specification /Please enter if you have this information/
Length over buffers: 19,880 mm
Broad Gauge Track: 1067 mm
Height over top of rail: 3,640 mm
Width: 2,750 mm
Wheel diameter: 730 mm
Wheelbase:  
Width: 2,750 mm
- Bogie pivot spacing: 11,500 mm
- Bogie pivot – rear axle: -- mm
- Bogie wheelbase: 1,500 mm
Weight: 39,9 t
Axle loads of front bogie: each 11.75 t
Axle load sub-frame: -- t
Axle loads of rear bogie: 12,5 t each
Axle load of rear axle: -- t
Engine output: 370 kW
Maximum traveling speed: 1200 metres/hour
- Self-propelled: 90 km/h
- Towed: 100km/h
*
*
*
 

Comments

No comments yet.

Add Comment

* Required information
(will not be published)
 
Bold Italic Underline Strike Superscript Subscript Code Quote Insert line Bullet list Numeric list Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
Notify me of new comments via email.
 
Remember my form details on this computer.
 

IN THE CHASE YOU ARE NOT REGISTERED OR NOT HAVE AN ACCOUNT IN TAMPERS.EU Professional Network:
To work with us is easy! Start at one of the steps:

Register, if you want more details! First you can register you and / or your company as User {MEMBER} of TAMPERS.EU Professional Network. We want to know who you are, to provide you a perfect service. This is total free of costs for end buyers (registered by email with a corporate domain), and you get access to prices and more information’s on the TAMPERS.EU site, can download files, buy products, send inquiries and receive also the weekly TAMPERS.EU Newsletter, if you like.
Subscribe, if you like to work with TAMPERS.EU! You can register your company as «FREE» Provider or Seller-owner is free of fees and no monthly fee! After your registration you have to login again, to make a change the "TAMPER.EU Provider membership levels /My subscriptions/" site and choose your subscription / status what suits best. This takes only 3 minutes - and opens lots of possibilities for you.

What do you want to be here? A "User" only looking or buy things, or a "Vendor", that has to offer something?  Decide, if you subscribe for a TAMPERS.EU account. However, users or vendors are defined as persons, companies, firms and government agencies that are directly related to the rail and / or mining industry or other sector.

>> User Sign In Tampers.EU     >> Provider Sign In Tampers.EU    >> Contact Online Customer Support Tampers.EU

Welcome to TAMPERS.EU! For help, access or registration of a company - client -  a real legal entity, please to contact Online Customer Support team or sales@tampers.eu

'English'
USD ($)
United States
  • Select language /Выберите язык/:
    English
    Bulgarian
    English
    Russian {Версия на Русском}
  • Select currency:
  • Select your country: